Goantifraud
How to Install and Configure the IP-telephony Server
How to Install and Configure the IP-telephony Server
07-Oct-2016 13:19

How to Install and Configure the IP-telephony Server

Recently, users ask a lot of questions about the installation and configuration of IP-telephony servers on the forums. The most common mistake beginners make is a purchase of a server with insufficient capacity, functionality and safety margin, as well as the wrong setting. Therefore, before purchasing you must take into account the number of users connected to the device and the number of simultaneous calls in a VoIP network.

Tower server, Intel Xeon E3 series processors, E5, E7, with a high capacity for work and different configurations will be suitable for small businesses with few employees. However, if you are planning a further major expansion, the best VoIP solution for small business will be a single-frame unit, based on astrisk. Experienced professionals use it as an inexpensive way to connect to an IP-telephony. In addition, it is easy to install and configure. It is also worth noting that Asterisk runs via common protocols - IAX, H323, SIP, ADSI, and SCCP, used in many VoIP devices, which solve the incompatibility problem.

You can simply install the 250 GB drive, which will provide 1 million minutes via the phone. At the same time, it is better to buy several capacious drives to record and store conversations.

Once connected to your ISP, you need to register with the network and configure the system. It is important to take into account the dummy module. The latter is necessary to configure the trunk and create a conference. Next, one should set a prefix and a server name, and then create SIP-accounts, with the file sip.conf, indicating the host name and so on. After the macro is added and specified, it is important to register SIP-accounts and use X-lite.

Are you interested in VoIP technology? Are you looking for a reliable start-up in the telecommunications sector? You will be interested in the opportunity to start a GSM termination business. You can get the maximum profit making the minimal investment! We offer a turnkey GoAntiFraud solution for beginners, which includes opportunities for efficient VoIP termination, as well as a set of equipment by GoIP, EjoinTech & China Skyline at low cost.

To receive incoming calls, you should specify the context, the number of registration, the host address with the expected port and interface, including a ban on unauthorized access. For outgoing calls, and prefix 8 should be set with the addition of relevant data. Setting only incoming calls, it is important to register: n user, n peer for outgoing calls only. When both incoming and outgoing calls are allowed, an n friend should be added. In the host line you should specify the IP address to allow connections for a client. To do this, you should set the address dynamic. Then again inscribe a user name and password used during registration.

When setting, it is also important to install voicemail in the appropriate language. There are three numbers and aliases that activate stdexten macro responsible for user calls. After the phone number and password are set, the subscriber is provided access to the interface to coordinate the voice box.

Next, you should set a direct connection between users. Allowing or banning it, you need to enter the user’s context name with the CallerID identification line, specifying the expand via Asterisk. It is also important to register data in the context menu, an asterisk, and then configure the IAX-device, OS and hardware Voicetronix, a sound driver for the ALSA console, speech synthesizer and Asterisk modules, including the analog device in a VoIP system. This takes into account the software or hardware clients. To test the correctness of Voip info, you need to run the command: # asterisk -vvvvvcd, specifying the console and determining the data.

GoAntiFraud offers you to start a profitable GSM termination business! If you are interested in VoIP technology, we will help you start your own business, yielding a stable income. By purchasing our comprehensive New Business package, you will start making money immediately! We will give you full technical support at all stages of business.
Start UP Light - $1300
If you purchase the START UP LIGHT package, you can get equipment at wholesale prices. Read more...
Start UP - $1900
If you purchase the START UP package, you can get equipment at wholesale prices. Read more...
DeLuxe - $5600
By purchasing the DELUXE package, you get equipment at wholesale prices. Read more...
DeLuxe Plus - $6700
By purchasing the DELUXE package, you get equipment at wholesale prices. Read more...
Ultimate - $10500
You are welcome to buy the ULTIMA package and get your equipment at wholesale prices. Read more...

Get free business advice

Get Consultation

Related Articles

GoAntiFraud

Topex SIM-boxes: Difficulty of Settings

26 Aug 2016 14:49
The equipment from the Romanian manufacturer Topex gained popularity almost on par with GoIP products. The devices of this brand are widely used for GSM voice traffic termination; the only limiting factor for some businesses is the higher cost of Topex equipment, compared with that of GOIP. The mode...
GoAntiFraud

Cisco Gateways and VoIP

21 Apr 2017 14:53
Technical experts note that Cisco VoIP gateways are one of the best options for organizing a VoIP system. They provide significantly more functionality for IP telephony than other gateways do. The most popular models are Cisco SB SPA112 and 122. Let's consider, in what situations it is most expedie...
GoAntiFraud

Application of Dinstar SIM-banks for GSM Termination

13 Jul 2016 15:08
You need one or more SIM-banks for efficient VoIP termination, especially when landing much GSM traffic. This equipment will provide an integrated storage of SIM-cards for operation. It enables remote control of GSM-gateways in combination with a SIM-server. In addition to GoIP, Ejoin Tech & Chin...
GoAntiFraud

SIParator is the Solution to protect the VoIP-network

09 Jun 2016 08:38
The use of VoIP-networks by companies usually results in unsuccessful attempts to find a compromise - between the receipt of the necessary flow of information and the prevention of unwanted intrusion. The advent of the Internet has provided great opportunities for businesses today but at the same ti...
GoAntiFraud

Problems of the Unresponsive System, Based on Asterisk

19 Aug 2016 12:22
In order to avoid traffic loss, freezes and other troubles, terminators set the new, simple and recent functionality. Preference is given to such VoIP solutions as Asterisk 13.1, in conjunction with cert7 and packages odbc 2.3.1-3 and libmyodbc 5.1.10-3. In addition, they set up Free PBX 13.0.156. ...
GoAntiFraud

The Use of SIM-banks in the VoIP GSM Termination

07 Jun 2016 09:22
The GSM termination of voice traffic is difficult to carry out without the appropriate equipment. In addition to VoIP gateways, so-called SIM-banks or SIM-boxes intended for the storage of large quantities of SIM-cards are used. Their use is especially important to those terminators, who provide lar...
GoAntiFraud

Software and Hardware for GSM Termination. Important Tips

17 Jun 2016 08:41
The productivity of your VoIP-system depends on the choice of hardware and software, which means - the volume of spent traffic. Terminator must understand that the hardware and software for GSM termination are closely interlinked, and it is important to take into account this relationship for a prof...

GoAntiFraud

GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud
GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud GoAntiFraud